Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Vindicator" push dagger, obverse side view in CPM154CM powder metal technology tool steel blade, 304 stainless steel bolsters, Afghanistan Lapis Lazuli gemstone handle, hand-carved leather sheath inlaid with Elephant skin
"Vindicator" with Lapis Lazuli Gemstone handle

Antheia

"Antheia" custom knife sculpture; chef's knife set in 440C high chromium stainless steel blades, hand-engraved 304 stainless steel bolsters, handles of Thulite, Blue Willow Sodalite, California Nephrite Jade, Australian Black Jade gemstones, stand of hand-cast bronze, pecan hardwood, Black Midnight granite
"Antheia" Custom Knife Sculpture/Chef's Set

One of the Graces or Charities of ancient Greek mythology was the goddess of flowers and wreaths. Her name was Antheia. She was also the goddess of blossoms, gardens, and vegetation, and of human love. This piece is named for her.

"Antheia" cast bronze detail.

I was inspired for this piece because my client allowed me the opportunity to make a small set that I had wanted to; a chef's set of various gemstone handled knives with the handles set as the pistils of a trio of blooms, with bright flashes of color over a casting of bronze. 

"Antheia" side view of hand-cast bronze sculpture with trio of knives with gemstone handles

For the knives, I chose three important styles that are critical in most kitchens. The Sabatier-style, a boning and trim knife, and a paring knife. The patterns are my Cygnus, Eridanus, and Corymbus, respectively. The Cygnus is a large, broad-bladed Sabatier used most frequently, the Eridanus a more slender boning and trim knife that's also great for breads, and the Corymbus is a new paring knife design. The handles are all similarly styled; the designs are matched and compatible.

"Antheia" top to bottom: Corymbus paring, Eridanus boning and trim, Cygnus Sabatier knives in mirror polished 440C high chromium stainless steel blades

The blades I made from 440C high chromium stainless steel, accurately hollow ground and mirror polished. This is an extremely corrosion resistant tool steel, with great wear characteristics and high toughness. The hollow grinds are very thin and the edges critically sharp. The grinds are matched and finished to a high polish for easy cleaning and low maintenance. The knives are full tang, a solid piece of steel from tip to end, and the tangs are fully tapered for good balance. They are comfortable, smoothed, rounded and completely finished for a great feel.

"Antheia" knife sculpture/chef's set knife "Cygnus" a sabatier style in hollow ground 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, and Thulite gemstone handle

Though the three knives are part of the same theme and piece of art, they are individual performers and individual works with their own flair and tempo. Each has individual and distinctive full filework, suiting the pattern and profile, and each has a distinctive and unique gemstone handle.

The Cygnus pattern Sabatier has Thulite gemstone, which is a manganese-bearing zoisite, named for the mythical island Thule, believed to be in Norway. The natural bright pink color is stable and striking, and the knife balances well in the hand right at the forefinger location.

The Eridanus is handled with Blue Willow Sodalite, a beautiful royal blue and white gemstone that is a sodium aluminum silicate, and has the contrast of blues and whites that is reminiscent of willow pattern ceramic plates and dishes popular since the late 1700s. The knife feels great, with a full width handle and balance exactly at the forefinger location.

"Antheia" boning, carving, trimming, knife "Eridanus" in mirror polished 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, blue willow sodalite gemstone handle

The paring knife is a new style, matching handles in profile with the two larger knives. For this knife, I made a very accurate and smaller radius grind for a strong spine yet a very thin cutting edge necessary for paring, and a fuller handle for comfortable grip on this smaller knife. I handled the knife with a doublet mount of two striking gemstones, a bright green Nephrite jade from California, mounted with jet black Nephrite jade from Australia. The blade feels light in the hand, and comfortably maneuverable for smaller work. The gemstone feels smooth and the polish is lustrous.

"Antheia" set paring knife: "Corymbus" in mirror polished 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Green California Nephrite Jade with black Australian Nephrite jade gemstone handle

I wanted all three knives to blend with embellishment, so I chose an interwoven petal pattern reflected in the bronze casting to engrave on the bolsters. The bolsters are zero-care 304 high nickel, high chromium austenitic stainless steel, and are mounted with zero clearance peened pins for permanent mechanical fitting to the full-tang blades. The bolsters are dovetailed to lock in the gemstone handle scales, which are fully bedded and sealed with rounded, contoured smoothed and polished surfaces for comfort and easy cleaning. I'm quite taken with the floral engraving pattern, a flowing and lively graceful play of lines and forms.

"Antheia" knives engraved bolsters detail in hand-engraved 304 stainless steel with gemstone handles

A knife set this striking had to have a very special form of display, and my client was kind enough to allow me to indulge in silicon bronze, a favorite of sculptural artists. I invested many hours in the hand-carving of wax, the burnout of the investment took nearly three days. In all, I cast over 18 pounds of bronze to yield just over 11 pounds of the finished form. The trimming, fettling, finishing, and reconstructing was quite laborious, but I was after a certain look. This look was a blossoming form with the knife handles elevated for easy reach, a piece of sculptural art that would grace any table or kitchen. The piece is entirely and completely unique; there is no other like it in the world, nor will there ever be, as no molds were made, and all was painstakingly hand-made.

"Antheia" bronze casting sculptural detail. All hand-made in wax, cast in lost wax process.

While the idea was clear, the construction was not. This was not a simple form that could be carved in wax and simply cast in metal and finished; I had to deconstruct it in my mind, create the many pieces and reconstruct it with a high purity weld process. In all, the cast bronze pieces numbered 27. The knives could not contact the bronze in use, so I created special heavy pockets of bronze into which I mounted individual liners of Pecan hardwood. The Pecan is incredibly strong and hard, it is a close relative of Hickory wood, so the blades can remain clean and sharp, held rigidly, tight and secure with just the right tension. Looking closely at the photos, you can see the Pecan hardwood liners held by compression only in the bronze casting.

"Antheia" detail: Pecan hardwood liners in bronze casting for knife blades are firm, strong, and durable.

I wanted the bronze to have an older, slightly weathered look, but wanted it to be smooth and silky. A bright polish wouldn't do; it looks too shiny and overshadows the knives, so I used a carefully applied heated patina to tone the colors of the bronze in different areas. The leaf tops have a bluish blush, some areas have a reddish cast. The entire casting is coated and sealed with clear acrylic, so that any splashes on the metal will not leave a mark. It's interesting that when you thump the bronze sculpture with your finger, it rings like a multi-toned bell, and is solid and dense.

"Antheia" cast bronze knife sculpture, chef's set detail of patina on bronze casting from above.

I tried to think of everything everlasting on this sculptural project, so made the Pecan liners removable. They are removed by unbolting the bronze from the granite base (a large 7/16" bolt through the bottom), and using a small dowel of wood to tap out the Pecan liners from the bottom holes. Then the Pecan liners can be unscrewed and cleaned, so that any debris that may find its way there can be removed. The Pecan is sealed with a mixture of mineral oil and beeswax.

"Antheia" detail of Pecan Hardwood knife blade liner bolted together with brass plated steel screws. The liners can be removed and cleaned, and protect knife and cutting edge.

I wanted a heavy, strong, and completely durable base, one that would accent the bronze while offering stability and longevity. I made this one of Black Galaxy Granite from India, a dark, natural material with copper flecks like stars in the night sky. The granite is polished and smooth, reflecting the bronze with warm tones of color. The base has neoprene feet that protect any surface it rests on, and is accented with an engraved black lacquered brass two-sided nameplate.

"Antheia" engraved brass nameplate and black galaxy granite base

There are lots of photos of this piece; I'm very proud of it and very happy the way it came out! My deepest thanks to my client who accepted my vision for his piece, and my prayers that his family will enjoy it for many generations to come!

"Antheia" knife sculpture, chef's set trio in stainless steel, gemstone and hand-cast bronze with granite base
"Antheia" Knife Sculpture/Chef's Set Specifications, Materials
  • Size
    • Overall Sculpture: 13.3" (33.8 cm) height x 11.5" (29.2 cm) wide x 11.5" (29.2 cm) depth
    • Knives:
      • Cygnus: Length Overall: 10.5" (26.7 cm), Blade Length: 6.0" (15.2 cm), Thickness: .204" (5.2 mm), Weight: 10.0 oz. (284 grams)
      • Eridanus: Length Overall: 10.75" (27.3 cm), Blade Length: 6" (15.2 cm), Thickness: .190" (4.8 mm), Weight: 8.7 oz. (247 grams)
      • Corymbus: Length Overall: 7.25" (18.4 cm), Blade Length: 3.5" (8.9 cm), Thickness: .116" (3.0 mm), Weight: 4.3 (122 grams)
  • Weight
    • Sculpture with Knives: 16 lbs., 11 oz. (7.57 kg.)
  • Blades: 440C high chromium martensitic stainless steel, hollow ground, mirror polished
  • Hardness:
    • Cygnus: Rockwell C59
    • Eridanus: Rockwell C58
    • Corymbus: Rockwell C56
  • Bolsters, Fittings: 304 high nickel, high chromium austenitic stainless steel, hand-engraved
  • Handles:
    • Cygnus: Thulite Gemstone
    • Eridanus: Blue Willow Sodalite Gemstone
    • Corymbus: Green Nephrite Jade/Black Nephrite Jade
  • Sheaths: Pecan Hardwood, brass plated steel screws
  • Stand/Sculpture: Silicon Bronze hand-cast by lost wax process, heat pattern patina, acrylic seal
  • Base: Polished Black Galaxy Granite, neoprene, engraved black lacquered brass nameplate

Thanks, L. B.!

Jay,
First, MERRY CHRISTMAS!
K. absolutely loves the knives and sculpture! She marveled at the balance and said each knife felt like a part of her hand and wished she had them for use preparing Christmas dinner last night. She recognized it immediately as an incredible work of art.
We both thank you from the bottom of our hearts for your “Labor of Love” – it shows in every detail.
Jay, you know I am a knife collector and have large collections of Loveless and Moran knives among many others. I have told many of the people in the knife world I deal with that you are the finest working knife maker in America. So many today are “Copycats” trying in vain to make a Drop Point Hunter or Damascus Fighter, rather than create from within themselves as you do. Keep it up and continue to be true to yourself.
With our warmest wishes,

K. and L. B. and Family


Museum Grade Knives, Swords, and Sculpture

Featured Knives Pages


XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels