Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Skeg"  tactical, counterterrorism, crossover knife, obverse side view in T4 Cryogenically treated ATS-34 high molybdenum martensitic stainless steel blade, 304 stainless steel bolsters, white and black tortoiseshell pattern G10 fiberglass/epoxy composite handle, hybrid tension tab-locking sheath in kydex, anodized aluminum, black oxide stainless steel and anodized titanium
"Skeg"

Videos!

From your requests, I've been building videos on YouTube. I'll keep this page current as new videos are created and posted.


Steel Treatment Videos Removed from YouTube

People have asked why I removed my string of YouTube videos about knife blade processing. I had over a dozen videos posted, and described heat treating and its effects in knife blades. I had them up for a while but I've deleted them for several reasons.

  • The videos were short; this was a suggestion and requirement by YouTube, because according to them, people don't have the attention span to watch a video longer than about 5 minutes max. Unless it's an actual show, drama, exposé, or documentary, few watchers of YouTube are interested in an hour-long lecture about steel treatment. This is a suggestion by YouTube, so please don't blame me.
  • I could see that people wanted more and more and more information, and wanted me to get into more detail, description, and facets of knifemaking. It would be easy for me to fall into the trap of making endless videos, since I love to talk, write, and present (take this huge website as an example), and I simply have a big mouth! While I'm doing this, I'm falling farther and farther behind on my orders; this is not a good thing!
  • There were endless questions, questions that take time and demonstration to answer. I've always said that there could be a graduate-level knifemaking degree, because it literally takes ten years to get proficient at knifemaking, and there are continual new developments. Taking the time to answer all these inquires and offer directions and details would quickly use up all of my time.
  • It's simply too much to present. If you doubt this, take a look at this website. I've written every word (apart from the testimonials and incoming emails) and it's over 600 "pages" long. When I emphasize pages (web pages), it's important to know that some of those pages represent hundreds of text pages in a book. Take a long while and read my "Blades" page, my "Heat Treating" page and even my latest "Food Safety and Kitchen Knives" page. Printed out, these would represent many hundreds of pages of text. If I were to simply record reading what is written on my website, it would take months... months! Kind of sobering, isn't it? It's taken me since 1996 to build all of this, to do all the writing and presenting. To "catch up" with a video set would mean many, many months, perhaps years of work.
  • I had to continually police the responses because YouTube allows anyone to comment, and trolls have nothing better to do! Consequently, while most questions and comments were positive and helpful, a few were just hateful or ignorant drivel, and nobody needs that in their life. This is the same reason I only rarely post on forums, because of the ignorant anonymous and the trolls. The only other option would be to prevent all comments and that seems limiting and non-interactive.
  • I had made several mistakes in the videos. One of them was technical, an audio problem that bothered some listeners, and frankly, I could do better. Another was some specific and technical microstructure and process descriptions which could have been better detailed and presented. Another mistake was in lighting; I was filming in the studio and the light changes dramatically and was distracting to viewers. Another mistake was not having charts or using a whiteboard. I know this sounds academic, but to clearly illustrate the technical parts of the presentation, all instructors write and draw. Another mistake was the format. It was too fractured, too detailed, and not a wide enough view was presented. I own all of these errors, and I promise to do better in the future, should the opportunity arise.

The future looks good; I look forward to remaking a video string about my favorite subject, knives. I've been approached by several production companies in the past, including ones that make knife competition shows, but have declined those, since making a knife is not like making a bowl of risotto. Others wanted to create onsite videos, but when they discovered where the studio was located, they bolted in fear. We have an ongoing joke here, "Everyone would rather take an ass-whipping than come to Clovis, New Mexico." And this is true, we've been told as much. We literally are many, many miles from any night life, entertainment, or attraction, either outdoors or in! And... it's kind of nice that way.

We shall see what comes up, but in the meantime, if you are a videographer, producer, or have any clear ideas, feel free to contact me; I always love to talk!

Feel free to research the many hundreds of pages on this website, the very best singular knifemaker website ever to exist!

Hi Jay,

I've been using Phact for 3 months to the day, and it has a special place in my heart and in my family.  Phact makes an appearance at every Sunday/Holiday dinner whether it be steaks, Tri-tip roasts, Picanha, thick cut pork chops, or bbq chicken. In fact, my kids (10 and 7 years-old) now get excited for a meal when they see "Dad's Jay Fisher Knife" set at my place at the table.

Your work is truly amazing Jay.  Phact is stunning to behold, but more importantly it's a functional work of art.  Even though it was not a commissioned custom piece, it fits my hand like a glove. The 440c handles every cutting task with ease and cleans up so easily after use, and there's not a single blemish on the blade after 3 months of use!

On a side note, thank you for you most recent page on Food Safety in Kitchen and Chef's Knives. It is so badly needed in the culinary industry and clarifies so much misinformation. I try and share the link whenever carbon steel knives are recommended for kitchen use.

Thank you for your latest comments about your YouTube heat treat videos.  I must say I was sorry you took them down, since a I probably watched them a dozen times, but I understand your high standards and your desire to present the material in the best possible way.  If you do still have them saved on a hard drive somewhere, I'd love to purchase a copy for my own personal edification and collection.

Thanks again for all of your work and dedication to the profession!

God Bless,
Adam


"Phact" fine handmade knife, obverse side view in 440C high chromium stainless steel blade, 304 stainless steel bolsters, Poppy Jasper gemstone handle, hand-carved leather sheath inlaid with rayskin

Knife and Sheath Demonstrations

On these videos, I demonstrate knives and their rigs, gear, sheaths, wear systems, and accessories. It's important to have a visual so my clients and other interested people can see how these systems all work together. Mainly, they are tactical, combat, and counterterrorism knives, and the arrangements and equipment I create comes from the requests of my tactical and professional clients. When you see the videos, you'll realize that a knife is so much more than a piece of steel with a handle; it's everything in the kit that gets the knife into the field and enables the knife in a successful mission.

  1. Here's a Detailed video demonstrating my modular sheath frame mount system on my Ananke khukri. It's a big knife, and the modular system takes care of a lot of wear and change issues.
  2. A detailed video demonstrating my standard tactical knife wear system, featuring the locking sheath, belt loops, straps, clamps, hardware, belt loop extender, sternum harness, and LIMA for a "PJLT," my most popular CSAR and tactical knife.
  3. A long and detailed video demonstrating setup, wear, use of my modular harness and knife sheath wear system, the most sophisticated and versatile knife sheath wear system in the world for my PJ-CT, a counterterrorism CSAR hybrid knife. The kit includes two complete sets o modular sheath and wear accessories, one in black, one in coyote brown. This includes locking sheaths in stainless steel, anodized aluminum, and kydex, belt loop extenders, sternum harnesses, spine harnesses, all mounting hardware, belt loop assortment, horizontal and vertical, belt clamp straps, LIMA (Lamp Independent Mount Assemblies), HULA (Holder, Universal Lamp, Articulating) with Maglite Solitaires and Mag-Tac flashlights, ventilated mesh pads, lanyards, Ostrich leg skin inlaid leather sheath, and handmade 1000 Denier ballistic nylon duffle
  4. A short video on packing the kit of one of my modular counterterrorism knives, the Hooded Warrior. The kit includes two complete sets o modular sheath and wear accessories, one in black, one in coyote brown. This includes locking sheaths in stainless steel, anodized aluminum, and kydex, belt loop extenders, sternum harnesses, spine harnesses, all mounting hardware, belt loop assortment, horizontal and vertical, belt clamp straps, LIMA (Lamp Independent Mount Assemblies), HULA (Holder, Universal Lamp, Articulating) with Maglite Solitaires and Mag-Tac flashlights, ventilated mesh pads, lanyards, Ostrich leg skin inlaid leather sheath, and handmade 1000 Denier ballistic nylon duffle

Art Casting Videos
  1. Bronze Casting at Sharp Instinct Studio with Jay Fisher, is a simple view of a small portion of making a custom knife stand in solid cast bronze. I emphasize a small portion because it's just the pouring and shakeout of the bronze casting, and not the designing, wax carving, prepping of the wax model, sprue and vent attachment, debubblizing, and investment that happens before the burnout, and it doesn't include the steps after the casting like fettling, cleanup, texturing, finishing, and patina application! But the casting is the most visually interesting part, and the reveal after the shakeout is always a treat, so that's why I chose this portion of the creative process.
  2. Casting Bronze Knife Stand for Knife Sculpture "Morta" is a video with details of the wax model, the casting, the shakeout, and the completed sculpture for the knife "Morta" with a 3400 year old bog oak handle.

Hello Jay,
I was in the early stages of searching for a quality SRK and, eventually, I ended up on jayfisher.com.
Although I spent some of my younger years as a USAF forward controller, I have to admit that I've never been much of a knife enthusiast. I really enjoyed the video on your homepage, however, so I thought I'd type a few words of appreciation. Knife enthusiast or not, the underlying message of self-sufficiency in your story really resonates with me. Please keep up the good work and, even more importantly, keep spreading the word about old-world skills, problem-solving and craftsmanship -- they're all dying concepts.
By the way, I was very pleased to see that you've dedicated some of your talent and vision to military units like the USAF PJs. I trained and worked with some of them: and they clearly deserve the recognition.
Have a good one,

--B.





Bronze Casting at Sharp Instinct Studio with Jay Fisher


Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels