Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Skeg"  tactical, counterterrorism, crossover knife, obverse side view in T4 Cryogenically treated ATS-34 high molybdenum martensitic stainless steel blade, 304 stainless steel bolsters, white and black tortoiseshell pattern G10 fiberglass/epoxy composite handle, hybrid tension tab-locking sheath in kydex, anodized aluminum, black oxide stainless steel and anodized titanium
"Skeg"

Tharsis Intense

"Tharsis Intense" in mirror polished and hot blued O1 high carbon tungsten vanadium tool steel blade, hand-engraved 304 stainless steel bolsters, Fossilized Stromatolite Gemstone handle, sheath in leather inlaid with black frogskin, stands of sculpted, hand-cast bronze
"Tharsis Intense" in hot blued, mirror polished O1 high carbon tungsten vanadium alloy tool steel blade, hand-engraved 304 stainless steel bolsters, fossilized stromatolite gemstone handle, black frogskin inlaid in hand-carved leather sheath
"Tharsis Intense" Fine Handmade Custom Knife
  • Type: Fixed blade art knife and sheath, sculptural stand
  • Size on Stands:
    • Knife: 10.375" (26.4 cm) tall, 6.5" (16.5 cm) wide, 3" (7.6 cm) deep
    • Sheath: 10.75" (27.3 cm) tall, 4.25" (10.8 cm) wide, 5" (12.7 cm) deep
  • Weight with Stands:
    • Knife: 2 lbs. 5 oz. (595 grams)
    • Sheath: 2 lbs. 4 oz. (567 grams)
  • Size:
    • Knife: Length Overall: 10.125" (25.7 cm), Blade Length: 5.75" (14.6 cm), Thickness: .168" (4.3 mm)
  • Weight:
    • Knife: 9.5 oz. (269 grams)
    • Sheath: 6.4 oz. (181 grams)
  • Blade: O1 tungsten-vanadium tool steel, hot-blued, mirror polished, hardened and tempered to 58HRC
  • Bolsters: Hand-engraved, mirror polished 304 high nickel, high chromium austenitic stainless steel
  • Handle: Fossilized stromatolite algae gemstone (jasper/hematite)
  • Sheath: Hand-carved leather shoulder inlaid with frog skin
  • Stands: Hand-cast silicon bronze, with antique patina, neoprene pad feet
  • Knife: The Tharsis is named for a vast and desolate plateau in the western hemisphere of the planet Mars. This is an intense version of the knife form, with full embellishment and sculptural artistic presentation, custom made for a special client. I started with the straightforward lines of the Tharsis pattern and form, a wide-angled tanto point blade, carefully hollow ground with deep and accurate grinds, sweeping terminations, and a short swage at the spine leading to the devastatingly sharp tip. The steel is not just common O1 (oil-hardening tool steel); this is a special O1 tool steel, made for high wear resistance with the addition of tungsten and vanadium. These alloys make the steel difficult to mirror polish, but the result was worth it. I hot-blued the blade for deep, penetrating corrosion inhibiting of the polished surfaces while presenting a glassy, jet-black blade. The hollow grind yields 5.5" of razor keen cutting edge, terminating in the sculpted and fileworked choil. The blade has full and complex filework, in a "lighting bolt" pattern, which extends around the fully tapered tang. The handle of the Tharsis is rounded and comfortable, which contrasts with the angular blade lines effectively. The handle is bolstered with 304 high nickel, high chromium austenitic stainless steel, an extremely difficult material to engrave, but with some of the most durable, striking, and long-lasting engraving possible, and zero chance of corrosion. The engraving style I chose for the piece is a study in sharp turns and curves reminiscent of a Celtic knot, but with a more abrupt angular quality. The engraving is deeply relieved in hatch, and blackened for contrast. The handle of this knife is special indeed, composed of quartz, jasper, and hematite, and is the fossilized remains of blue-green algae that lived billions of years ago on our planet. The algae is Precambrian, some of the oldest fossilized remains of life on our planet. The reason for the red color and hematite (iron oxide) is that in those early times, the earth's oceans contained much more iron than today, and iron in accretionary sedimentation that replaces organics to create fossil minerals produces red coloring. The patterns and colors of this gemstone are striking, with clouds, swirls, and bands of red ember color with shiny gray hematite interspersed. The fossilized Stromatolite is hard, tough, and durable jasper with a bright polish and will literally outlast every other part of this work of art. The knife center of balance is right at the forefinger placement and the knife feels solid in the hand with the thumb placed on the rise.
  • Sheath: The Tharsis Intense required a commensurate sheath, and I made this one in hand-carved 9-10 oz. thick leather shoulder. The leather is carved to accept six substantial inlays of frog skin, which reminds me of the interesting surface of Mars. The carvings and inlay shapes match the engraving angles and voids, and the heavy leather is dyed black and sealed for longevity. The sheath is stitched with black nylon and the welts are dressed, smoothed, and polished for a finished feel. The sheath is deep and protective while revealing a hint of the Tharsis inside.
  • Stands: One of the most striking things about this knife are the individual complimentary stands. I hand-carved these forms in wax (see photos below) and hand-cast them in bronze, in a very old and noble process of lost wax casting. Only bronze can add this type of display, class, and integrity to the piece, and it's heavy and tough, and each piece is solid, cast in one object. I worked the surface of the bronze forms to appear aged and weathered, with a mellow patina of golden browns, blacks and bits of red and warm tones to compliment the gemstone handle of the knife without overwhelming the knife and sheath. The patina and surface changes depending on the light, angle, and direction, with translucency as only bronze patinas can display. And, of course, the shape of the forms reflect the hand-engraving of the bolsters in design and scope, the result of the same mind and hands in sole authorship. The knife is delicately balanced at point and edge, and the sheath rests in a triangular socket and fork to display as much as possible of each piece. The bronzes are waxed in the traditional finish, and set with neoprene pads for protection of any surface they rest upon.
  • This is a beautiful custom set, lifting the Tharsis design to new heights in style, finish, and artistic form. Please look over the large photo set below to enjoy all the aspects of this artwork and functional tool.

Thanks, A. G.!


Hi, Jay.
I received the knife safe and sound. It's perfect! The best way I can explain my happiness with it is to simply say that I would be honored if all my custom knives come from only your studio.
Cheers,

A.


Hi Jay,
I hope you and yours are doing well. :)
It has been a few years since I received Tharsis Intense. I just wanted to reach out to let you know that the knife continues to inspire me. To own such a treasure is a real privilege. Thank you!

Cheers,
A.


Return to Featured Knife Pages


XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels